Installation
------------------
Unpack the IMAGE file and copy the image an SD card: (assuming SD card at /dev/mmcblk0):

  # zstd -d slarm64-current-*-core-*-build-*.img.zst
  # dd if=slarm64-current-*-core-*-build-*.img of=/dev/mmcblk0 bs=1M

or unpack directly to the card

  # zstdcat slarm64-current-*-core-*-build-*.img.zst > /dev/mmcblk0


Attention!
------------------
on the pinebook eMMC is defined as /dev/mmcblk2
a SDcard how /dev/mmcblk0


Instalation eMMC/NAND/USB-HDD
------------------
Flash the image to USB-SSD/HDD:
        # dd if=slarm64-current-*-core-*-build-*.img of=/dev/sda bs=10M
    or
        # dd if=slarm64-current-*-xfce-*-build-*.img of=/dev/sda bs=10M
    then edit 2 files in USB-SSD/HDD:
        # mount /dev/sda2 /media
        # mount /dev/sda1 /media/boot
        # sed -i 's:mmcblk0p:sda:' /media/boot/uEnv.txt
        # sed -i 's:mmcblk0p:sda:' /media/etc/fstab
        # sed -i 's:,data.*\-ro::g' /media/etc/fstab

or

to transfer a system with the SD to eMMC, you need to boot from the start and run the script:
  # transfer-to-disk


Default Login
------------------
login: root